The Ford Barn - View Single Post

eagle · 08-14-2018, 07:57 AM

The valve originally was as stated earlier in the thread, however after over 80 years there are a lot of fixes on our As and so don't take anyone's advice on this, check your own. Simply remove gas line ar carb and check for gas flow in either direction. Will also give you a good opportunity to check for leaking valve and for proper gas line insertion at carb. Check also for good flow.

08-14-2018, 07:57 AM	#10
eagle Senior Member Join Date: Aug 2011 Location: Eagle Bend, MN Posts: 2,025	Re: Gas valve on position The valve originally was as stated earlier in the thread, however after over 80 years there are a lot of fixes on our As and so don't take anyone's advice on this, check your own. Simply remove gas line ar carb and check for gas flow in either direction. Will also give you a good opportunity to check for leaking valve and for proper gas line insertion at carb. Check also for good flow. __________________ "There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."