The Ford Barn - View Single Post

Bored&Stroked · 03-28-2021, 05:42 PM

So - given the chart above you most likely have either a 7.872 length pushrod, or you decided to go to the 1" longer one - at 8.872. If your manifold has the low fuel-pump riser (which I believe it does), then you'll be using the shorter rod and you should NOT be using any type of spacer on the fuel-pump stand.

03-28-2021, 05:42 PM	#9
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,062	Re: fuel pump push rod So - given the chart above you most likely have either a 7.872 length pushrod, or you decided to go to the 1" longer one - at 8.872. If your manifold has the low fuel-pump riser (which I believe it does), then you'll be using the shorter rod and you should NOT be using any type of spacer on the fuel-pump stand.