The Ford Barn - View Single Post

BUBBAS IGNITION · 08-25-2015, 01:34 PM

I use that part from Macs every so often. The spec of 40 ohms is very wrong and they do get very hot the first few times they are ran. The spec should be .6 to .8 ohms .
Smoke is normal hee as well ....
Did ya happen to check the voltage at the coil with the new ballast......??

08-25-2015, 01:34 PM	#5
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Re: Another coil resistor question I use that part from Macs every so often. The spec of 40 ohms is very wrong and they do get very hot the first few times they are ran. The spec should be .6 to .8 ohms . Smoke is normal hee as well .... Did ya happen to check the voltage at the coil with the new ballast......?? __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected]