View Single Post
Old 11-29-2019, 05:05 AM   #5
old31
Senior Member
 
Join Date: Jan 2016
Posts: 1,244
Default Re: Install generator

I have the same problem and its frustrating to spend so much time on 1 bolt.

So I got a 10" rod a little smaller than bolt size. I beveled a v on one side. The v side is then put in from the firewall side till the point comes out of the radiator side. This will align the gen to the bracket.

I then slowly pull out the rod as I slowly slide in the generator bolt from the radiator side.
old31 is offline   Reply With Quote