Quote:
Originally Posted by oldforder
thanks, I will have to look to see if all the holes to the main and cams are open, and didn't get plugged when I wiped the sludge out. Sure would like to see a picture though so I know what I am looking for.
|
Here's a link to pictures showing the holes in my very clean and painted block. You need to change .net to .com to make the link work. I thought I had the pictures posted here, but using the search didn't turn them up. I usually have pretty good luck by using the Google Search.
Try a Google search for "main bearing oil holes in valve chamber" and see if that works.
https://www.vintagefordforum.net/for...-engine-topics
Here's another link that should get you to my pictures:
http://www.ahooga.com/wwwboard/messages/282982.shtml