Re: KR Wilson axle stand specs questions
It's cool looking and all that, but to actually do any real maintenance or work on a banjo rear, this thing is ALMOST worthless. To do any real maintenance, you'd have to remove the torque tube and drive shaft. There goes the need for the big extension at the front. Then to get to the axles or gears, you need to unclamp the clamps and remove the axle bells. Anything else that you might need to do to the rear like brake and drum work, or even outer bearing changes would be done without removing the rear end from the car as an assembly. So, THIS tool is almost nothing more than space-robbing "eye candy". But it IS cool looking, and an absolute winner for bragging rights. Now, go ahead and throw something at me! DD
|