[FHFD]

I don't think a picture would show it, if it were there (inside of door). The metal brace/bracket on the striker/door handle end of door is still in place, and accepts the new window felt channel fine.

What I need is the inside of door (hinge end) bracket/brace that accepts the new window felt and metal channel, that apparently was spot welded from the factory, but is missing all together on my door. I couldn't find a listing in Macs, Dennis Carpenter, or Bob Drake for this piece.
I believe I may end up fabricating something, but without an old piece as a sample it may end up being a true test of my inventiveness.