The Ford Barn - View Single Post

JDupuis · 03-12-2018, 07:51 AM

Hey Jeff, Assemble the harness and switch, and place on the end of the steering column, before running the wires through the frame. Does the light switch move easily, or at all?
Chances are, you may not have any problem.
In the past, I had to file down a new harness wafer/disc as it was thicker then the original, being used in an original switch. Good Luck.
Keep us informed of your findings. Jeff D

03-12-2018, 07:51 AM	#2
JDupuis Senior Member Join Date: Jan 2017 Location: Maryhill Ont Canada Posts: 834	Re: USA Light Switch Hey Jeff, Assemble the harness and switch, and place on the end of the steering column, before running the wires through the frame. Does the light switch move easily, or at all? Chances are, you may not have any problem. In the past, I had to file down a new harness wafer/disc as it was thicker then the original, being used in an original switch. Good Luck. Keep us informed of your findings. Jeff D __________________ Let's let pylons, be pylons!