The Ford Barn - View Single Post - Installing hub races

cadillac512 · 11-03-2019, 08:09 AM

I've always just coated the bore with motor oil. A solid surface (like the concrete floor) is best to keep the hub from bouncing, and a fairly heavy hammer will work great. Make sure to get the race started straight with light taps at first. If the race cocks, tap it out and start over. Good luck!
Terry

11-03-2019, 08:09 AM	#3
cadillac512 Senior Member Join Date: Apr 2019 Location: Kansas Posts: 926	Re: Installing hub races - what lube? I've always just coated the bore with motor oil. A solid surface (like the concrete floor) is best to keep the hub from bouncing, and a fairly heavy hammer will work great. Make sure to get the race started straight with light taps at first. If the race cocks, tap it out and start over. Good luck! Terry __________________ "It don't take but country smarts to solve the problem" (Smokey Yunick) '41 Merc Town Sedan / 260" 8CM engine '66 Fairlane four door / "warmed up" 302