View Single Post
Old 02-21-2020, 07:00 PM   #2
grumppyoldman
Senior Member
 
grumppyoldman's Avatar
 
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
Default Re: Hard to start when hot

You didn't mention if it set for a while, that it would start right up. I was having that problem with my 41 and after I cleaned the connections on the Ballast resistor, no more problems. The resistor is under the dash above the steering column, on a fuse block. May be your problem also. Al
grumppyoldman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)