Thread: Floor boards
View Single Post
Old 05-23-2018, 02:10 PM   #5
slammin
Senior Member
 
slammin's Avatar
 
Join Date: Aug 2017
Location: Fruita, CO
Posts: 281
Default Re: Floor boards

Quote:
Originally Posted by Benson View Post
Depending upon where your battery terminal bolts are located with respect to the hole in floor board, it is nice to just flip back the carpet or mat then pull the metal cover and unhook one battery cable without removing the 10 or twelve screws in the lower floor board.

This is really nice if there is an electrical fire and you must unhook battery to stop it!
That's the main reason to install a shutoff switch in the battery ground cable.
slammin is offline   Reply With Quote