View Single Post
Old 03-16-2017, 10:08 AM   #8
Milt/Las Vegas
Senior Member
 
Milt/Las Vegas's Avatar
 
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 448
Default Re: 302 into 1953 ford

Quote:
Originally Posted by paul2748 View Post
I would go with the 302. Kits are available to install. I few mods to the engine and it will be a screamer.
You will need a rear sump pan from a pickup or van,be sure to get the special main bearing bolt with a 3/8 ths. stud purtruding from the head of the main bearing bolt and the dipstick and tube.
__________________
Milt/Las Vegas
Milt/Las Vegas is offline   Reply With Quote