The Ford Barn - View Single Post

Cape Codder · 08-10-2017, 07:35 PM

Brakes were running pretty hot so tried to adjust the right rear one. Could not budge the adjuster even with an extension bar. Took drum off to find nothing wrong with the brakes, main or emergency. Tried to move adjuster again with no results.

Removed backer plate and put adjuster square in large vise, while putting mount bolts back in backer plate to try and turn backer plate. End result was we were able to break loose the adjuster. This adjuster was BACKED OUT to the max and then some. Brakes were adjusted properly when NEW backer plate and all other parts were installed approx. 10 months ago.

Question: How could this happen? How could that adjuster unscrew ALL THE WAY OUT?

08-10-2017, 07:35 PM	#1
Cape Codder Senior Member Join Date: May 2010 Posts: 1,262	Brake Adjuster Frozen Brakes were running pretty hot so tried to adjust the right rear one. Could not budge the adjuster even with an extension bar. Took drum off to find nothing wrong with the brakes, main or emergency. Tried to move adjuster again with no results. Removed backer plate and put adjuster square in large vise, while putting mount bolts back in backer plate to try and turn backer plate. End result was we were able to break loose the adjuster. This adjuster was BACKED OUT to the max and then some. Brakes were adjusted properly when NEW backer plate and all other parts were installed approx. 10 months ago. Question: How could this happen? How could that adjuster unscrew ALL THE WAY OUT?