The Ford Barn - View Single Post - Steering gearbox from steering column

Synchro909 · 08-01-2017, 06:20 PM

What Marshall said, it's MUCH easier to take the steering column out to work on it. Remove the steering wheel while it is in the car, remove the starter, light switch, pitman arm etc (I have to change everything around when talking about a LHD car), raise the front of the car and take the column out the bottom once you remove the floorboards. That might sound like a lot of work but in the long run, it will be easier.

08-01-2017, 06:20 PM	#5
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: Steering gearbox from steering column - newbie question What Marshall said, it's MUCH easier to take the steering column out to work on it. Remove the steering wheel while it is in the car, remove the starter, light switch, pitman arm etc (I have to change everything around when talking about a LHD car), raise the front of the car and take the column out the bottom once you remove the floorboards. That might sound like a lot of work but in the long run, it will be easier. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.