The Ford Barn - View Single Post - Rochester small base on a 276"; Jet size?

40cpe · 02-27-2017, 12:03 PM

I had the manifold bored. The carb bores measured just under 1 7/16", something like 1.420. The carb is a Delco-Remy rebuild and the seller said it was 278 CFM.

02-27-2017, 12:03 PM	#17
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,025	Re: Rochester small base on a 276"; Jet size? I had the manifold bored. The carb bores measured just under 1 7/16", something like 1.420. The carb is a Delco-Remy rebuild and the seller said it was 278 CFM.