View Single Post
Old 08-27-2019, 03:49 AM   #4
JeffB2
Senior Member
 
JeffB2's Avatar
 
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,194
Default Re: Unibody car on jack stands.

Quote:
Originally Posted by JimNNN View Post
Haven't had had an old car with unibody construction til the '65 T Bird I bought last year. I need to get underneath to access the trans vacuum mo. valve. I presume the jack stands will go on the big seam weld running the wheel base along the outer edge of the underside, but I thought I'd check with you guys first.



Thanks.
This group should have the right answer http://vintagethunderbirdclub.net/ph...ic.php?t=13310
JeffB2 is offline   Reply With Quote