The Ford Barn - View Single Post

Bill S · 08-26-2019, 04:57 AM

I would take the plugs out and see if the engine will turn with a breaker bar. If so spray some oil in each cylinder and turn the engine over a few times before replacing the plug so that you do not get lock up.

08-26-2019, 04:57 AM	#10
Bill S Senior Member Join Date: May 2010 Location: H.B. So. Calif Posts: 411	Re: 50 custom I would take the plugs out and see if the engine will turn with a breaker bar. If so spray some oil in each cylinder and turn the engine over a few times before replacing the plug so that you do not get lock up.