The Ford Barn - View Single Post

Mr. J · 08-09-2017, 10:32 PM

I fixed the warped carb this evening, and I was going to hold off on the leak as long as I could and just add as needed, but as for the flush I'm going to have to wait until I have time to drain it and remove it. I really appreciate all the advice and I hope to keep updating as I get time to work on it. I'm just suprised it ran back then because the carb didn't have the gasket between the half's or where it mounted to the manifold.

08-09-2017, 10:32 PM	#21
Mr. J Junior Member Join Date: Aug 2017 Location: Southwest Virginia Posts: 25	Re: Basic advice I fixed the warped carb this evening, and I was going to hold off on the leak as long as I could and just add as needed, but as for the flush I'm going to have to wait until I have time to drain it and remove it. I really appreciate all the advice and I hope to keep updating as I get time to work on it. I'm just suprised it ran back then because the carb didn't have the gasket between the half's or where it mounted to the manifold.