The Ford Barn - View Single Post - Noisy metal timing gear cured by torsional damper

SAJ · 03-20-2017, 03:22 AM

Hi Waxhead. These dampers are made by Murray Horn in Levin N.Z. His Company is Engine Restorations Ltd. His email is [email protected]
Murray says this is the best way to contact him.
The dampers are a straight fit to replace the standard Model A pulley. An added benefit is a shallow reverse scroll in the rope seal area to help contain oil.
SAJ in NZ

03-20-2017, 03:22 AM	#7
SAJ Senior Member Join Date: Jul 2010 Location: Auckland, New Zealand Posts: 514	Re: Noisy metal timing gear cured by torsional damper Hi Waxhead. These dampers are made by Murray Horn in Levin N.Z. His Company is Engine Restorations Ltd. His email is [email protected] Murray says this is the best way to contact him. The dampers are a straight fit to replace the standard Model A pulley. An added benefit is a shallow reverse scroll in the rope seal area to help contain oil. SAJ in NZ Last edited by SAJ; 03-20-2017 at 06:59 PM. Reason: removed extra dot at the end of email address