The Ford Barn - View Single Post

Marco Tahtaras · 06-04-2011, 08:08 PM

You can hopefully see the details from the bottom, looking through to the top of the spring unit. The '28-29 spring has about four spring wires running fore and aft. These wires have a squared "U" shaped dip about 1/3 back from the front. That "dip" measures about 1" deep by 1-1/2 wide fore and aft in each of those wires (from memory). This is to accommodate the drawn down cross welt on the seat cushion cover on '28-29 Roadsters and Phaetons.

06-04-2011, 08:08 PM	#2
Marco Tahtaras Senior Member Join Date: May 2010 Posts: 3,099	Re: Roadster Seat Springs Difference You can hopefully see the details from the bottom, looking through to the top of the spring unit. The '28-29 spring has about four spring wires running fore and aft. These wires have a squared "U" shaped dip about 1/3 back from the front. That "dip" measures about 1" deep by 1-1/2 wide fore and aft in each of those wires (from memory). This is to accommodate the drawn down cross welt on the seat cushion cover on '28-29 Roadsters and Phaetons. __________________ http://www.abarnyard.com/