Quote:
Originally Posted by Oakridgeacres
I installed a (REX-A-CO) gauge a couple weeks ago. Installed per instructions from an earlier post. Gauge seems to work just fine. About 7# pressure when you first start up on a slight rev, but as oil gets warmer it goes down to just above readable when cruising at about 45mph. Is this about what other's have encountered with oil pressure gauges? Thought this was an appropriate question to go along with original post.
|
That's about normal with the oil gauge, depending on what weight oil used. They can be calibrated if necessary.
Flamingo,
Moto-meters were made for under dash and steering column too; not just as a rad cap.
