The Ford Barn - View Single Post - Saving a family treasure...(1936 1and1/2 ton)

COE Dan · 09-10-2015, 10:23 PM

Bret,

Welcome to the forum and to the world of Ford V8s. As you get into your project, you may find the big truck parts are a bit less common. However, don't get discouraged. Parts are out there - my '47 COE shares wheel bearings with 2003 F-150 pickups if you can believe that. There are a number of folks with the big trucks who have plenty of knowledge to share and are great leads on where to get parts or data. Just ask - it's what I do all the time and I've never come up empty handed on FordBarn.

Dan

09-10-2015, 10:23 PM	#12
COE Dan Senior Member Join Date: May 2010 Location: Now in Wichita, KS Posts: 251	Re: Saving a family treasure...(1936 1and1/2 ton) Bret, Welcome to the forum and to the world of Ford V8s. As you get into your project, you may find the big truck parts are a bit less common. However, don't get discouraged. Parts are out there - my '47 COE shares wheel bearings with 2003 F-150 pickups if you can believe that. There are a number of folks with the big trucks who have plenty of knowledge to share and are great leads on where to get parts or data. Just ask - it's what I do all the time and I've never come up empty handed on FordBarn. Dan