Thread: clutch plate
View Single Post
Old 03-16-2020, 01:50 PM   #2
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: clutch plate

Removing the hogs head can be a bear. Some depends on whether it has a starter or not. The top will come off but other things may need to be removed or moved out of the way to get it off & back on again. I don't know if it will allow much disassembly though. This is one persons procedure. There are likely others too.
http://www.mtfca.com/discus/messages...tml?1348584247
rotorwrench is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)