The Ford Barn - View Single Post

frank d kirkstad · 08-28-2019, 07:22 PM

Thank's Kurt.
I'm using a 4 blade stock fan. At about 45, I'm only at less than half throttle with plenty to spare. I'll try and hook up a tach. to see what my rpms really are.
Thank's
Frank

08-28-2019, 07:22 PM	#5
frank d kirkstad Junior Member Join Date: Feb 2019 Location: Little Silver, New Jersey Posts: 28	Re: Mitchell Overdrive Thank's Kurt. I'm using a 4 blade stock fan. At about 45, I'm only at less than half throttle with plenty to spare. I'll try and hook up a tach. to see what my rpms really are. Thank's Frank