The Ford Barn - View Single Post

FlatheadTed · 07-12-2019, 04:57 PM

Hope don't worry about the edyoumacachon join the club .sorry to here you got slapped down ,
Just something to try Get a rag and stuff it in the top of the master cylinder and use a air gun on it to blow the fluid through with a single bleeder open at a time just short bursts of air ,it sounds like trapped air ,if that doesn't work ,it could be swollen hoses,or the MC not assembled correctly ,

07-12-2019, 04:57 PM	#11
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: Brakes Hope don't worry about the edyoumacachon join the club .sorry to here you got slapped down , Just something to try Get a rag and stuff it in the top of the master cylinder and use a air gun on it to blow the fluid through with a single bleeder open at a time just short bursts of air ,it sounds like trapped air ,if that doesn't work ,it could be swollen hoses,or the MC not assembled correctly , __________________ http://www.flatheadted.com Flathead Ted brake Floaters , Last edited by FlatheadTed; 07-12-2019 at 05:13 PM.