The Ford Barn - View Single Post - Dropping the Pan Part 3- Oil Pump and Valve Cover

CarlG · 05-10-2013, 04:57 PM

Using the cork gasket I got from Snyders, I lightly coat both sides with lithium grease. Only torque it to about 5-6 ft lbs not 20 like Andrews book calls for.

05-10-2013, 04:57 PM	#11
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,115	Re: Dropping the Pan Part 3- Oil Pump and Valve Cover Using the cork gasket I got from Snyders, I lightly coat both sides with lithium grease. Only torque it to about 5-6 ft lbs not 20 like Andrews book calls for. __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club