The Ford Barn - View Single Post

4dFord/SC · 10-02-2019, 03:12 PM

A few years ago, I used a Timken/Torrington BA-1210 Needle Bearing inside 1.25"x1.437"x1.5" and 1"x1.25"x1" bronze sleeves for my '40. Total cost at a local bearing supply house was $6.31.

10-02-2019, 03:12 PM	#11
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: steering columm bushing A few years ago, I used a Timken/Torrington BA-1210 Needle Bearing inside 1.25"x1.437"x1.5" and 1"x1.25"x1" bronze sleeves for my '40. Total cost at a local bearing supply house was $6.31.