Quote:
Originally Posted by Fred A
I was asking about the blue coil because I have a couple of 30 year olds from my Porsche days. I must have burned up the FSI approved coil when the car stalled in my absence and cooked the whole thing. The woman at FSI talked me into a new module with the plate and all was wrong on arrival. She may have known less than I did about the product. Thanks: Fred A
|
By all means use the old ones. If you shake them and they make no oil noise, then they are paste filled and can be installed with the terminals down like orig. A coils. Test them for resistance with an ohm meter 1st. I use an old 12 volt blue paste filled. Supposedly no coils are made in the US or Germany any longer so quality may be suspect. Pertronix I believe are made in Mexico.