View Single Post
Old 05-31-2020, 03:42 PM   #13
Kilroy
Junior Member
 
Kilroy's Avatar
 
Join Date: May 2010
Location: Orange Ca
Posts: 28
Default Re: Newly assembled Flatty cranking force??

Quote:
Originally Posted by Terry,OH View Post
check the wires that are smoking sounds like bad terminals on the ends of the cables.
Quote:
Originally Posted by 3739ford View Post
When I first tried to crank my motor the wires got hot. Replaced them with new and still got hot. Moved the ground wire down from ceramic coated header to one of the starter bolts and that solved the problem.
This is something to think about actually. I'm going to take a closer look at the wires now and see if that may be part of the problem.
Kilroy is offline   Reply With Quote