The Ford Barn - View Single Post

Patrick L. · 10-10-2019, 03:14 PM

Resistors in headlights doesn't make sense to me either, but, I'm not familiar with those headlights.

If you are using the parks as turn signals and the cowls are incandescent then resistors for the rear turns shouldn't be needed.

The difference in tail light brightness is odd. What lights are they ? Are they the type that require the lead between upper and lower to be cut ? I agree about the ground and swapping comments.

10-10-2019, 03:14 PM	#7
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Tail light / Switch Issues Resistors in headlights doesn't make sense to me either, but, I'm not familiar with those headlights. If you are using the parks as turn signals and the cowls are incandescent then resistors for the rear turns shouldn't be needed. The difference in tail light brightness is odd. What lights are they ? Are they the type that require the lead between upper and lower to be cut ? I agree about the ground and swapping comments.