The Ford Barn - View Single Post - No reverse BW R-10

Frank Miller · 09-18-2019, 07:22 AM

I'm pretty sure you will need to disassemble it to see what did not go together correctly. I use grease to assemble the rollers on the one way clutch. With the OD lever forward it should act like a regular transmission. You can bench test all that stuff.

09-18-2019, 07:22 AM	#21
Frank Miller Senior Member Join Date: May 2010 Location: Auburn, MA Posts: 2,106	Re: No reverse BW R-10 I'm pretty sure you will need to disassemble it to see what did not go together correctly. I use grease to assemble the rollers on the one way clutch. With the OD lever forward it should act like a regular transmission. You can bench test all that stuff. __________________ “The technique of infamy is to start two lies at once and get people arguing heatedly over which is true.” ~ Ezra Pound