The Ford Barn - View Single Post

Ol' Ron · 01-20-2019, 06:30 PM

This is a very good cam for a stock or near stock displacement engine. Built many 258 engines with this cam. These engines were the stock type rebuilds of the late 40's early 50's 20 cubes and a point in compression. Dual 94 made them hard to beat back in the day. When reading JWL's book the Max #1 put the stock flathead over the 100 hp mark. Unfortunately, in today's market, it's an expensive proposition, any cam is!!!

01-20-2019, 06:30 PM	#4
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,857	Re: Isky 3/4 Max 1 Camshaft This is a very good cam for a stock or near stock displacement engine. Built many 258 engines with this cam. These engines were the stock type rebuilds of the late 40's early 50's 20 cubes and a point in compression. Dual 94 made them hard to beat back in the day. When reading JWL's book the Max #1 put the stock flathead over the 100 hp mark. Unfortunately, in today's market, it's an expensive proposition, any cam is!!!