[JM 35 Sedan]

Here is another drum retainer, aka safety hub. This is probably what I will be doing on my 35 fordor with original mechanical brakes since the other type available attach using longer bolt that fasten on hydraulic brake wheel cylinders. These were once carried by Speedway, but now look to be discontinued. I did wind up getting a pair of these in a set of '40-'48 rear drums that were given to me by a friend and fellow EFV-8 Club/RG36 member (thank you Bill G.). If I can't find a new set like these, I will remove these for use on my 35 since these 40-48 drums are probably too heavily worn to be safely used.
On these the small ring is welded to the wheel bearing mounting/retaining part of the inner hub and that retains the larger ring that gets bolted to the backing plates and flanges on the small end of the axle housings.