Quote:
Originally Posted by JM 35 Sedan
Capt, if your axle housings look like these, with the angled flange welded in place like these for rear wishbone attachment, then you would have a '35-'36 rear.
|
These are the '35-'36 rear radius rods with integral spring mounts, and which would bolt-on to the tabs welded onto the axle bells at an angle, as in JM35's pictures. Otherwise, as someone pointed-out earlier, you probably have a '37-'40 rear assembly, which will bolt right in/swap as a complete assembly, torque tube and all. DD