Quote:
Originally Posted by Flathead Youngin'
Does anyone have the drawings or files for, say, a 59a style head gasket and water pump? I'm not wanting to make gaskets, I may have access to a water jet and would like to maybe have some pressure testing plates cut out. I don't have access to good drawing software any longer....
|
Several ways to do that.
1- Get some used or new gaskets for patterns.
2- Rub trace the areas to paper. Make sure the paper is fastened tight so it
doesn't move during rubbing.
3- Try some of the free drawing programs available for download.
I have not used this one but it looks like it might work.
http://www.inkscape.org/en/
While you are machining the head plate you can install holes for installing dowel pins to locate heads.