View Single Post
Old 09-22-2019, 12:00 PM   #13
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,369
Default Re: 1937 85hp cylinder sleeve possibly leaking water into the pan?

The tin can sleeve motors were about .040" thick. That one may be a bit thicker but I can't tell. Ford may have repaired a block but I'm not sure if they took the time to do that. If it was sleeved due to a crack then that would also be a plausible possibility. Bar's Leaks or some other similar product should be tried first. It sounds like a slow leaker anyway.
rotorwrench is offline   Reply With Quote