Re: valve clearence
Depends on what the valves are made of. I recently had a camshaft reground and the people who did it said 0.025" on the exhaust with stainless valves. I settled on 0.022" and all has been well. Noisy while the motor is cold but quieten right down as it warms up.
He told of a guy who had put stainless valves in his Model T and set the clearances as per spec. When things weren't working out, an inspection of the camshaft showed that the followers were rubbing the heel of the cam - hard. They opened the gap to 0.025" and all has been well there too.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
|