1947 Sedan rear brake drums
I am finally rebuilding the rear brakes on my 47 sedan. I riveted on NOS brakelining that I had and bought and installed new wheel cylinders. All went together just fine. I wanted to have the lining ark's to match the drum but could not find anyone local so gave up on that. I would still do that if I found a local source.
Since lining was down to the rivets, leaving their traces in the drum. Otherwise they look pretty good. I would like to have the drums surfaced before buttoning it up. My brake drums are the swagged together drum with the hub outside. Can any local brake shop turn my drums or do I need someone that know these old Fords with special adapters for the lathe?
Finally, can any of you suggest a machine shop in the Ventura, Santa Barbara or LosAngeles county California who knows how to work on these old Ford drums. Thank you - Bob
|