View Single Post
Old 06-13-2021, 08:14 PM   #1
psimet
Member
 
psimet's Avatar
 
Join Date: Apr 2021
Location: Elgin, IL
Posts: 95
Default Is my block dead?

Been going through a long series of steps to get my 28 Tudor up and running after sitting for at least 25-35 years.

I decided to flush the water jacket running water through it from a hose. After 40 or so gallons I noticed a couple of small drops on the ground from the rear of the engine.

Found a crack in the block that was weeping. Cylinder 4. Under the edge of the lip on the drivers side. Picture is looking up at it.

Ran the borescope into each cylinder and not water in them. Also no water in the oil.

Options?

psimet is offline   Reply With Quote