View Single Post
Old 06-13-2021, 02:42 PM   #3
Hal Beatty
Senior Member
Hal Beatty's Avatar
Join Date: Jul 2012
Location: Bellingham, WA
Posts: 212
Default Re: 39 Trans rebuild

Front SKF 6208, Rear SKF 6306.

Use the snap rings from the old bearings as modern ones are too thin and will allow the shafts and bearings to move in the housing.

I got sealed bearings and removed the seals from the side of the bearings facing in... left the outer seals in place.
Hal Beatty is offline   Reply With Quote