The Ford Barn - View Single Post - Dimensioned drawing of flathead V8 engine

37 Cab · 01-21-2016, 06:06 AM

Sponsored Links (Register now to hide all advertisements)

Valves are both closed on compression stroke so the oil method should work fine. It is accurate to within 1/2 degree so for ignition purposes it will get you there.

01-21-2016, 06:06 AM	#6
37 Cab Senior Member Join Date: Dec 2014 Location: Miami Oklahoma Posts: 535	Re: Dimensioned drawing of flathead V8 engine Sponsored Links (Register now to hide all advertisements) Valves are both closed on compression stroke so the oil method should work fine. It is accurate to within 1/2 degree so for ignition purposes it will get you there. __________________ Tommy