The Ford Barn - View Single Post

glennpm · 11-01-2019, 09:48 AM

No reason it can’t be flipped other than interference. Maybe the drag link will be too long to accommodate the “flip”. Check from wheel lock to wheel lock. I would also make sure that your coupler in the drag link is threaded equally. If not sure, unscrew it clean the threads an start it at both ends at the same time.

11-01-2019, 09:48 AM	#96
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: 36 Ford drag link orientation question No reason it can’t be flipped other than interference. Maybe the drag link will be too long to accommodate the “flip”. Check from wheel lock to wheel lock. I would also make sure that your coupler in the drag link is threaded equally. If not sure, unscrew it clean the threads an start it at both ends at the same time.