View Single Post
Old 10-24-2020, 07:42 PM   #20
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,541
Default Re: Identify this engine.

when you turned it over the first time, all the valves moved, then stuck open. when you now say you didnt see any valves move, again, they are stuck open. if they were really stuck bad you would not have been able to turn it at all. me, i would spray a bunch of your favorite oil thru the spark plug holes for a few days, then stick an allen wrench in the hole and try to tap the ones down that should be down. look at the lifters to see the ones with a gap. the mice were in the valley floor, not on top of the valve, so the may loosen up
cas3 is offline   Reply With Quote