View Single Post
Old 04-21-2019, 08:14 AM   #5
Senior Member
Join Date: Feb 2019
Location: New Zealand
Posts: 208
Default Re: Oil flow in a factory bypass system?

Originally Posted by 51 MERC-CT View Post
After the oil passes thru the filter it exits thru (2) i/16" holes in the center tube and out the bottom.
The center tube holes are at about the same level as the inlet tube and with the inlet fitting removed it may be possible to see at least one of the holes thru the inlet hole.
Ok, I will have a better look tomorrow.
gavinnz is offline   Reply With Quote