The Ford Barn - View Single Post - Mixing Synthetic with Conventional Motor Oil

Jemelton# · 02-19-2018, 04:41 PM

I was thinking that before taking out my 29 Tudor for the first time this spring, that when I change the oil I would replace it with a good synthetic.

Would this be a problem because of the amount of conventional oil leftover in the dip tray?

Or should I drop the oil pan and clean out all of the conventional oil?

I might add that I last cleaned out the oil pan two years ago and I only have put on less than 700 miles since then.

02-19-2018, 04:41 PM	#1
Jemelton# Senior Member Join Date: Oct 2013 Location: SW Iowa, Near Omaha, NE Posts: 110	Mixing Synthetic with Conventional Motor Oil I was thinking that before taking out my 29 Tudor for the first time this spring, that when I change the oil I would replace it with a good synthetic. Would this be a problem because of the amount of conventional oil leftover in the dip tray? Or should I drop the oil pan and clean out all of the conventional oil? I might add that I last cleaned out the oil pan two years ago and I only have put on less than 700 miles since then.