View Single Post
Old 10-03-2019, 08:54 AM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,369
Default Re: Bench testing coils....

You can recreate the system function. You will need a switch to act as a timer and some jumpers to interconnect the circuit. Something to act as a ground plane or a common jumper so you can ground the spark plugs & circuit would be needed. A high tension wire for the spark plug and a battery to power it up to round off the items needed. A car battery or possibly a lantern battery could be used. 12-volt would likely work better. Insulate the high tension well. You don't need a bite from that.
rotorwrench is offline   Reply With Quote