View Single Post
Old 09-20-2019, 01:48 PM   #19
Senior Member
ryanheacox's Avatar
Join Date: Apr 2013
Location: Northwest CT
Posts: 663
Default Re: Transmission Reassembly

The face of the bearing that contacts the pressure plate faces out, so you press against that face to get it on the hub. I have used Loctite 609 retaining compound on a couple loose generator bearings with good success. It takes a LOT of heat to break it down. I wouldn't worry about that.

Just FYI, Bert's has good originals for a good price.
ryanheacox is offline   Reply With Quote