View Single Post
Old 05-23-2019, 06:17 AM   #106
sharp21
Member
 
Join Date: Mar 2019
Location: Spring, TX
Posts: 76
Default Re: First Flathead Build

Sponsored Links (Register now to hide all advertisements)
Small wins.


Got the first one out. I leveled up on the fork and gave it a smack with the hammer. That got the keeper to move and the retainers just fell off.

From there I levered out the spring aaaaand.... stuck again!



That’s the valve guide from the top. I tried getting on it with the hammer and an extension but no dice.



That’s it in the inside. I can easily get the fork on it now but as it fully engages there is nothing to lever against. Can’t get it to budge.

I’ve soaked it with 50/50 and am off to work. Will try again tonight


Sent from my iPhone using Tapatalk
sharp21 is offline   Reply With Quote