Quote:
Originally Posted by Fortunateson
I'm going to be doing something similar. One bank had water enter from a leaky roof via heads without spark plugs. I've been soaking in ATF and acetone. So far no movement. I thought I might flip it over, remove the pan, oil pump, and then the crank. I should be able to tap on the con rods to get some movement. Yes? Don't want to hijack but thought it might pertinent.
|
This is what the book I’m working from offers:
I’m definitely not reusing the pistons but will reuse the rods if I can. I may soak it first then try to punch them out.
Sent from my iPhone using Tapatalk