[Bruce in southern OH]

There is a thread now on V8 section titled "39 clutch issue " take a look at his photos, look at the clutch release arm. I need to see if I can get a number off the clutch release arm. My 39 Lincoln Zephyr I am working on after I replaced the clutch disc, pressure plate, throw out bearing I still do not have enough travel to release the clutch properly. (free play ) Clutch is releasing but in future I will not have any adjustment because my clutch release arm will hit back of bell housing and I am now maxed out in adjustment. Any information appreciated, Bruce
( 31Pickumup, release arm is at a greater angle towards rear of car which would help me out as far as adjustment and free play )